What should be confirmed before RFQ?

What structure or profile data should be checked before RFQ. Pulley diameter and tooth/profile data.

R3V/9J R5V/15J R8V/25J

High Power Banded Belts

Product Overview

• Whether this series matches the machine family you are sourcing for.
• What structure or profile data should be checked before RFQ.
• When to stop browsing and send the project for technical review.

Ready for technical review

Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.

• Belt marking or sample photo
• Pulley diameter and tooth/profile data
• Target quantity and delivery expectation

Request quote

Features

Enhanced power transmission capacity
High adhesion strength between tie-band and the belts
Eliminates changes of mismatch in length
Antistatic, oil and heat resistant
Manufactured through single-stage curing process
Banded belts are recommended under following conditions
Severe vibrations
Vertical shaft drives
V-flat drives
Agricultural drives
Conveyer systems
Stone crushers, reciprocating compressors, generator sets, pumps cold forging machine etc All Banded belts are high power belts. While using these belts it is always recommended to use standard pulleys with a proper guard. Appropriate belt sitting can only be obtained if the pitch maintained for the belts and that of pulleys is the same. We recommend that the customer should get back to us with details before using banded belts to enable us to provide the best solution. Improper design using banded belts can lead to premature failure of the drive system.

Overview

Banded belts can be made by joining either Deep Wedge Narrow belts. Each band may contain the specified number of belts. We recommended maximum of five belts in one tie-band.

The standard length designation for Narrow belts is as follows: Belt number / 10 = Outside length in inches. For example: R5V 950 means 950 / 10= 95 inches outside length

Standards, Dimensions & Product Range:

The standard length designation for Narrow belts is as follows: Belt number / 10 = Outside length in inches. For example: R5V 950 means 950 / 10= 95 inches outside length

Section	Top Width (mm)	Thickness (mm)	Angle (Deg)
3V/9J	9.7	10	40
5V/15J	15.8	16	40
8V/25J	25.4	25	40

Production Range

R/3V

R/5V

R/8V

No.	Model	Length (inch)	Length (mm)	No.	Model	Length (inch)	Length (mm)
1	R/3V 510	51 inch La	1295 mm La	13	R/3V 1000	100 inch La	2540 mm La
2	R/3V 530	53 inch La	1346 mm La	14	R/3V 1060	106 inch La	2692 mm La
3	R/3V 560	56 inch La	1422 mm La	15	R/3V 1120	112 inch La	2845 mm La
4	R/3V 600	60 inch La	1524 mm La	16	R/3V 1180	118 inch La	2997 mm La
5	R/3V 630	63 inch La	1600 mm La	17	R/3V 1250	125 inch La	3175 mm La
6	R/3V 670	67 inch La	1702 mm La	18	R/3V 1320	132 inch La	3353 mm La
7	R/3V 710	71 inch La	1803 mm La	19	R/3V 1800	180 inch La	4572 mm La
8	R/3V 750	75 inch La	1905 mm La	20	R/3V 2100	210 inch La	5334 mm La
9	R/3V 800	80 inch La	2032 mm La	21	R/3V 2550	255 inch La	6477 mm La
10	R/3V 850	85 inch La	2159 mm La	22	R/3V 2750	275 inch La	6985 mm La
11	R/3V 900	90 inch La	2286 mm La	23	R/3V 3100	310 inch La	7874 mm La
12	R/3V 950	95 inch La	2413 mm La	24	R/3V 3750	375 inch La	9525 mm La
				25	R/3V 4330	433 inch La	10998 mm La

No.	Model	Length (inch)	Length (mm)	No.	Model	Length (inch)	Length (mm)
1	R/5V 510	51 inch La	1295 mm La	18	R/5V 1500	150 inch La	3810 mm La
2	R/5V 530	53 inch La	1346 mm La	19	R/5V 1600	160 inch La	4064 mm La
3	R/5V 560	56 inch La	1422 mm La	20	R/5V 1700	170 inch La	4318 mm La
4	R/5V 600	60 inch La	1524 mm La	21	R/5V 1800	180 inch La	4572 mm La
5	R/5V 630	63 inch La	1600 mm La	22	R/5V 1900	190 inch La	4826 mm La
6	R/5V 670	67 inch La	1702 mm La	23	R/5V 2000	200 inch La	5080 mm La
7	R/5V 710	71 inch La	1803 mm La	24	R/5V 2120	212 inch La	5385 mm La
8	R/5V 750	75 inch La	1905 mm La	25	R/5V 2240	224 inch La	5690 mm La
9	R/5V 800	80 inch La	2032 mm La	26	R/5V 2360	236 inch La	5994 mm La
10	R/5V 850	85 inch La	2159 mm La	27	R/5V 2500	250 inch La	6350 mm La
11	R/5V 900	90 inch La	2286 mm La	28	R/5V 2650	265 inch La	6731 mm La
12	R/5V 950	95 inch La	2413 mm La	29	R/5V 2800	280 inch La	7112 mm La
13	R/5V 1000	100 inch La	2540 mm La	30	R/5V 3000	300 inch La	7620 mm La
14	R/5V 1060	106 inch La	2692 mm La	31	R/5V 3150	315 inch La	8001 mm La
15	R/5V 1120	112 inch La	2845 mm La	32	R/5V 3350	335 inch La	8509 mm La
16	R/5V 1250	125 inch La	3175 mm La	33	R/5V 3550	355 inch La	9017 mm La
17	R/5V 1400	140 inch La	3556 mm La	34	R/5V 3930	393 inch La	9982 mm La
				35	R/5V 4330	433 inch La	10998 mm La

No.	Model	Length (inch)	Length (mm)	No.	Model	Length (inch)	Length (mm)
1	R/8V 1180	118 inch La	2997 mm La	15	R/8V 2650	265 inch La	6731 mm La
2	R/8V 1250	125 inch La	3175 mm La	16	R/8V 2800	280 inch La	7112 mm La
3	R/8V 1320	132 inch La	3353 mm La	17	R/8V 3000	300 inch La	7620 mm La
4	R/8V 1400	140 inch La	3556 mm La	18	R/8V 3150	315 inch La	8001 mm La
5	R/8V 1500	150 inch La	3810 mm La	19	R/8V 3350	335 inch La	8509 mm La
6	R/8V 1600	160 inch La	4064 mm La	20	R/8V 3550	355 inch La	9017 mm La
7	R/8V 1700	170 inch La	4318 mm La	21	R/8V 3750	375 inch La	9525 mm La
8	R/8V 1800	180 inch La	4572 mm La	22	R/8V 4000	400 inch La	10160 mm La
9	R/8V 1900	190 inch La	4826 mm La	23	R/8V 4250	425 inch La	10795 mm La
10	R/8V 2000	200 inch La	5080 mm La	24	R/8V 4500	450 inch La	11430 mm La
11	R/8V 2120	212 inch La	5385 mm La	25	R/8V 4750	475 inch La	12065 mm La
12	R/8V 2240	224 inch La	5690 mm La	26	R/8V 5000	500 inch La	12700 mm La
13	R/8V 2360	236 inch La	5994 mm La	27	R/8V 6000	600 inch La	15240 mm La
14	R/8V 2500	250 inch La	6350 mm La	28	R/8V 6150	615 inch La	15621 mm La
				29	R/8V 6290	629 inch La	15977 mm La

Proceed with RFQ

When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.

Request quote Agricultural Belts Open downloads